NDL2(DHC3L) Series electronic timer
NDL2(DHC3L) Series electronic timer
NDL2(DHC3L) Series electronic timer
NDL2(DHC3L) Series electronic timer

NDL2(DHC3L) Series electronic timer

Power supply: Internal power supply
Battery life :≥ 6 years (25℃)
Fatigue error :≤0.1%
Minimum pulse width :≥0.2 seconds
Weight: about 60g
Installation method: panel type
Opening size :22.2×45mm
Voltage input: DC voltage input DC4 ~ 30V
                       AC voltage input AC/DC110 ~ 240V
No voltage input (contact input) : contact resistance through to the largest 10 k or less Ω time (ON)
                                                       contact disconnect minimum resistance 500 k or higher Ω time (OFF)
                                                       input maximum residual voltage 0.5V
Working environment temperature :-5 ~ +40℃
Storage temperature :-25 ~ +55℃
Working environment humidity :35 ~ 85%RH

Characteristics

  • The most generic cheap device when you are tired
  • 48 x 24 mm DIN standard panel size, can be extended to 50 x 60 mm
  • Self-power,do not need external, built-in lithium battery
  • Any input voltage, dc input voltage and ac voltage input type
  • Six or eight LCD display
  • No mechanical wear, long service life
  • Conforms to the standard: Q/WDH 02-2003, GB14048.5-2001, IEC60947-5 - "97

ndl2 dhc3l dzslsq 2

 

Types of meaning

Display mode

LCD (Liquid crystal display )

Reset the way

External terminal/panel button reset

External terminal reset

According to figures

6 bits (word height 6.7mm)

8 bits (word height 6.5mm)

When he feel tired range

99999.9h

99h59m59s

9999h59m

9999d23h

9999h59m59f

999999h59m

No voltage input (contact input)

DHC3L-1

DHC3L-2

DHC3L-3

DHC3L-4

DHC3L-5

DHC3L-6

Dc voltage input (DC4 ~ 30V)

DHC3L-1V

DHC3L-2V

DHC3L-3V

DHC3L-4V

DHC3L-5V

DHC3L-6V

AC voltage input (AC/DC110 ~ 240V)

DHC3L-1A

DHC3L-2A

DHC3L-3A

DHC3L-4A

DHC3L-5A

DHC3L-6A

Technical parameter

Electrical source

Internal power supply

The input voltage

The DC input voltage

 DC4~30V

Battery life

≥6 years (25 ℃)

The AC input voltage

A C/DC110~240V

Error when you are tired

≤0.1%

No voltage input (Contact input)

Contact switching on maximum resistance≤10KΩ(timingON)

Minimum pulse width

≥0.2s

Contact disconnect minimum resistance 500 k or higher Ω time (OFF)

Heavy volume

About 60 g

Input maximum residual voltage 0.5V

installation

panel

Operating environment temperature

-5~+40℃

The size of hole

22.2×45mm

Storage temperature

-25~+55℃

 

 

Working environment humidity

35~85%RH

 

Electrical characteristics

Insulation impedance

100MΩ(DC500V)

pressure

AC2000V 50/60Hz 1 min

anti-interference

IEC 61000-4, Class 3

vibration

Anti-vibration: 10-55Hz (cycle 1 minute) amplitude 0.75mm, X, Y and Z 1 hour

 in all direction

False operation: 10-55Hz period, 1-minute amplitude 0.5mm, X, Y and Z for

 10 minutes in all directions

impact

Impact resistance: 30G X,Y, Z 3 times each

False action: 10G X,Y,Z 3 times each

 

DHC3L Series 
Dimensions drawing

ndl2 dhc3l dzslsq 03

接线方法及注意事项 ndl2 dhc3l dzslsq 4

1. The signal input and the reset input switch or circuit should be as close as possible to the terminal of the timer.Keep the input line as short as possible.
2. Dhc3l-a is the input type of AC voltage of the accumulator signal, and AC/DC110 ~ 240V voltage can be input, but the reset signal of this type is shown in Figure (3). Only contact signals can be input.
3. The reset signal should not be switched on for a long time to avoid wasting the internal battery.
4. Contact input should be reliable.
▲ This product has built-in lithium battery, do not pressure deformation or overheating above 100℃, so as not to cause lithium battery rupture or burn out.

Message feedback

News Center

Naidian Group is an electronic timer manufacturer and digital timer supplier, providing high-power relays, electronic time relays, digital timer relays, DC to AC solid state relays, and digital display timer relay knowledge popularization.

Return to work in the disease

On February 26, the production of NPOWER Group resumed. The director and manager of our company personall...

Some common applications of a microcomputer time controller

Some common applications of a microcomputer time controller include Time switch, Electronic timer, Digita...

What is the difference between electronic timer relay and ordinary relay?

However, the difference between a time relay and an ordinary relay is that in addition to the switching c...

GET A QUOTE

Get in Touch
×