DS-110, 120 time relay

Setting voltage:
Delay range: 0.1 ~ 0.3s 0.25 ~ 3.5s 0.5 ~ 9s
Dc: 24, 48, 110, 220V
Communication: 100, 110, 127, 220, 380V
Operating voltage: current: ≤85% DC: ≤70%
Return voltage: ≥5%
Contact capacity: DC inductive 100W long term permissible current 5A
Contact form: one pair of terminations, one pair of transitions
External dimension: 128×94×141mm
Installation mode Front and rear wiring of the board
Note: THE DC band "C" is for long-term operation

Main technical data

Product model		The rated voltage	Delay setting range	Action time is getting worse	Power consumption
DS- 111 C		DC 24V 48V 110 220V	0.1-1.3s	0.06s	12W
DS- 112 C			0.25-3.5s	0.12s
DS- 113 C			0.5-9s	0.25s
DS- 111			0.1-1.3s	0.06s	36W
DS- 112	DS- 115		0.25-3.5s	0.12s
DS- 113	DS- 116		0.5-9s	0.25s
DS- 121		AC 110V 127V 220V 280V	0.1-1.3s	0.06s	75VA
DS- 122	DS- 125		0.25-3.5s	0.12s
DS- 123	DS- 126		0.5-9s	0.25s

Operation value: DC relay not more than 70% rated value;Ac relays not greater than 85% rating.
Return value: not less than 5% rating.
Contact capacity: The disconnect capacity of the output contact of the product is 50W in dc inductive load with voltage no more than 250V, current no more than 5A, and time constant of 5±0.75ms.The output contact can reliably operate and return 5X10 times under the above specified load conditions.The output contact is allowed to be switched on for a long time with 5A.
Dielectric strength: all conductive terminals of the product are connected together, and can withstand 2000V (effective value) 50Hz alternating current voltage for 1 minute test between exposed non-charged metal parts or shells, without insulation breakdown or flasticity phenomenon.

Internal wiring

ds 110 120sjjdq 2